-
Home
-
About Us
-
Cementing Instruments
-
Cement Slurry Preparation Instruments
-
Cement Slurry Maintenance Instruments
-
Consistency Testing Instruments
-
Gas Channeling Prevention Testing Instruments
-
Fluid Loss Testing Instruments
-
Rheology Testing Instruments
-
Compressive Strength Testing Instruments
-
Mobile Laboratory
-
Instruments for Tests below Ambient
-
Parts of Instruments
-
Cement Slurry Preparation Instruments
-
Lab Instruments
-
Solutions
-
Downloads
-
Product Overview
- Cement Slurry Preparation Instruments
- Cement Slurry Maintenance Instruments
- Consistency Testing Instruments
- Gas Channeling Prevention Testing Instruments
- Fluid Loss Testing Instruments
- Rheology Testing Instruments
- Compressive Strength Testing Instruments
- Lab Instruments
- Parts of Instruments
- Mobile Laboratory
-
Product Manual
-
Selection Table
-
Product Overview
-
Contact
-
Sales Hotline
Cementing Instruments
- Cement Slurry Preparation Instruments
- Cement Slurry Maintenance Instruments
- Consistency Testing Instruments
- Gas Channeling Prevention Testing Instruments
- Fluid Loss Testing Instruments
- Rheology Testing Instruments
- Compressive Strength Testing Instruments
- Mobile Laboratory
- Instruments for Tests below Ambient
- Parts of Instruments
Cementing Instruments
Circular Cement Expansion Mold
![Consistometer-Fluid loss cell-Viscometer-oilfield cementing testing instruments- Tianjin Nithons Technology Co., Ltd.]()
![Consistometer-Fluid loss cell-Viscometer-oilfield cementing testing instruments- Tianjin Nithons Technology Co., Ltd.]()
NHPQ Circular Cement Expansion Mold
>> This expansion mold is made in conformance with standards of ISO 10426-5 and GB/T 33293. It is designed to measure the shrinkage and expansion properties of oil well cement under atmospheric pressure.
>> The entire mold is made of stainless steel, which is durable in use.
>> The standard kit also includes a micrometer and a micrometer stand, satisfying requirements on data measurement after tests
>> Possessed with good elasticity, the outer ring is able to resist permanent deformation with proper use.
>> Dimension Drawings
>> Mold Calibration
Elasticity of the outer ring shall be calibrated once a year. While calibrating, 1000g±1g of force shall be applied on the mold. Distance between two measurement steel balls shall increase 2mm±0.3mm and permanent deformation doesn’t occur. Force shall be applied vertically (90°) to the slit to avoid any test error. The test shall be performed at least three times to obtain an average value with a standard deviation of 0.05mm.
Elasticity of the outer ring shall be calibrated once a year. While calibrating, 1000g±1g of force shall be applied on the mold. Distance between two measurement steel balls shall increase 2mm±0.3mm and permanent deformation doesn’t occur. Force shall be applied vertically (90°) to the slit to avoid any test error. The test shall be performed at least three times to obtain an average value with a standard deviation of 0.05mm.
NITHONS
链接
链接
-
Mobile Site -
Wechat -
Linkedin -
Weibo
Contact Us
-
Tel: 86 22 58627718
Fax: 86 22 58627711
E-mail：abroadsales@nithons.com -
Add:E77, Universal Enterprise Park, No.1 Sizhi Rd., Xiqing District, Tianjin, China
-
Web: en.nithons.com
- About Us
-
Cementing Instruments
- Cement Slurry Preparation Instruments
- Cement Slurry Maintenance Instruments
- Consistency Testing Instruments
- Gas Channeling Prevention Testing Instruments
- Fluid Loss Testing Instruments
- Rheology Testing Instruments
- Compressive Strength Testing Instruments
- Mobile Laboratory
- Instruments for Tests below Ambient
- Parts of Instruments
- Lab Instruments
- Solutions
- Downloads
Copyright: Tianjin Nithons Technology Co., Ltd. 津ICP备17005192号
-
Online
-
022-58627718
-
